Irrigator
Employer
372 Eastside Highway
Hamilton, MT 59840
United States
Job description
Worker will be required to perform a variety of duties related to the production of alfalfa and grain. The majority of the work activities during the overall contract period, however, will be related to Irrigation.
Irrigation duties will include the following:
Hand lines: connect pipes; check alignment of pipe and adjust for proper water distribution; attach lines to water supply; turn valves to start flow of water; disassemble lines and carry pipes across fields at specified intervals; move pipes through freshly irrigated crops and/or plowed fields where mud may be deep at times; lift and carry pipe sections weighing approximately 40 pounds on a sustained basis.
Wheel lines: start gasoline engines and operate controls to move lines across fields at specified intervals.
Flood Irrigation: lift gate in side of flooded irrigation ditch/pipe permitting water to flow into bordered section of field; shovel and pack dirt in low spots of embankment or cut trenches in high areas to direct water flow; close gate in ditch/pipe when bordered section is flooded.
Other Irrigation Duties: remove pipes/wheel lines from storage and lay out/place in predetermined patterns in fields; lubricate, adjust, repair and replace parts such as sprinkler heads and drive chains using hand tools; observe revolving sprinklers and adjust to ensure proper operation and uniform distribution of water; disassemble, service and store pipes/mainlines/wheel lines after irrigation season.
To meet minimum acceptable performance standards when irrigating, the worker must, after a 10 day conditioning period, move an average of at least 48 40-foot sections of 3-inch pipe or 44 40-foot sections of 4-inch pipe per hour under normal working conditions.
Special Requirements
Applicants must have 20 days experience with irrigation work. To meet minimum acceptable performance standards when irrigating, the worker must, after a 10-day conditioning period, move an average of at least 48 40-foot sections of 3-inch pipe or 44 40-foot sections of 4-inch pipe per hour under normal working conditions.