Farmworkers And Laborers, Crop

Job description

Workers will perform assign duties as instructed by their supervisor.
Sweet Potatoes: Plantation: Workers will select large sweet potato plant from the beds; they will cut the plant and place into a basket. Once the basket is full and tight the process will be done again. The worker must be able to complete three baskets every hour. Workers will then plant sweet potato by machine and by hand. When planting by machine the worker will set a plant on the butterfly device that holds the plant repeatedly. The plant end must stick out of the butterfly device at least 2-3 inches in order to be planted correctly. When done by hand the worker will walk down the field make a 3 inch hole in the ground, place the plant in the hole, cover the hole firmly, and space each hole about 10 inches apart repeatedly throughout the daily shift. Harvesting period: The worker will pick the sweet potatoes up from the ground by class. There are 3 types of classes of sweet potato that require harvesting at once which are number 1’s (large potato), canner(medium small broken cracked unshaped potato’s), and seed (small potato’s). The worker must first select number 1’s placing them in a 5/8 bu bucket, once the bucket is full, the worker will take the bucket to the truck and dump the sweet potatoes in the back of the truck. A small ticket will be given to you to keep and a total will be counted at the end of each day. The workers will then go back to the picking area and fill his bucket up with canner sweet potato. Once the bucket is full the worker will take the bucket to the truck and dump the bucket. The worker will go back to his picking area and fill his bucket up with seed sweet potato.

The worker in order to perform this kind of work must be able to work outside for at least 6 hours a day in all kinds of weather and be in a possession of the requisite physical strength and endurance, working quickly and skillfully with their hands repeatedly, The employer will provides the tools necessary (if applicable) to perform the described job duties without charge to the worker. The employer will charge the worker for reasonable costs related to the worker’s refusal or negligent failure to return the tools or due such worker’s willful damage or destruction of the tools.

Workers that qualify may be required to operate Agriculture Machinery or Equipment.

General farm upkeep and maintenance such as painting, fixing, cleaning, and organizing out building and equipment.

Employees may volunteer to work additional hours when work is available. Workers should expect occasional periods of little or no work because of weather, crop or other conditions beyond the employer’s control. These periods can occur any time throughout the season, if workers request a leave of absence during these periods of no work, the hours will be deducted from the hours offered under the ETA 790A.

A copy of the work contract or a copy of the ETA 790 in lieu of a work contract, and any modifications, will be provided to the H-2A worker no later than the time at which the worker applies for the Visa, or to a worker in corresponding employment, no later than on the day work commences. For an H-2A worker going from an H-2A employer to a subsequent H-2A employer, a copy of the contract will be provided no later than the time an offer of employment is made by the subsequent H-2A employer.

Special Requirements

This type of work, involves working conditions that require tremendous stamina, a high level of physical activity in cold or extremely hot conditions in direct sunlight and in adverse weather such as rain. The work requires a high level of physical conditioning. Due to the type of work involved, there is a Probationary Period of five (5) days beginning with the first day of employment, to show possession of the requisite physical strength and endurance to perform this type of work.